No software to install, no back and forth by e-mail: every product comes with an online designer. You place your artwork, you see the result, and we receive a file that is already print-ready.
Create my design
What would you like to start with?
Each product has its own online designer: you place your artwork, you see the result, we receive a print-ready file.
👕
Custom textiles
T-shirts, crew-neck sweatshirts, hoodies, zip hoodies and caps. You drop your artwork onto the garment photo and move it within the print area: the preview updates live, in the chosen colour.
🔥
DTF sheets
Transfers to press yourself, delivered as a sheet. The online layout tool lets you group several designs on the same sheet to make the most of the surface — or you send a sheet that is already laid out.
✨
Stickers & labels
Round or square, individually or in series. The designer shows the trim line, the bleed and the safe zone while you place your artwork, and warns you if a white edge is likely to appear.
🖼️
Posters
From A3 to A0, for a shop window, a concert or an exhibition. Design online with the cut guidelines, or send your ready-made PDF if you work with layout software.
How does it work?
Everything is done from the product page, with no files exchanged by e-mail.
1
Choose your product
Textile, DTF sheet, sticker or poster, then the size you want. The designer opens directly on the product page.
2
Place your artwork
Import your image, move it, rotate it, resize it. The print area and cut guidelines stay visible while you work.
3
The site checks for you
Resolution too low, bleed not covered, size that does not match: you are warned before ordering, not after.
4
Printing in Nîmes
Your order reaches the workshop with a print file already at the right dimensions. We print, then we ship.
Prepare your file
The designer warns you if there is a problem, but a file that is well prepared from the start always gives a better result.
Bleed, in one picture
- Bleed — your artwork must extend this far. It is the margin eaten by the cut.
- Trim line — the actual edge of the finished product.
- Safe zone — keep text and logos inside, otherwise they may be cropped.
Cutting machines have a tolerance of a few tenths of a millimetre. Without overhang, the slightest offset leaves a white edge on the border — it is the most common defect on a sticker or a poster.
Stickers: 2 mm bleed, 2 mm safe margin.
Posters: 3 mm bleed, 5 mm safe margin.
Textiles and DTF: no bleed, nothing is cut — the artwork is printed as is, transparent background included.
Accepted formats
PNG and JPEG are accepted everywhere. For textiles and DTF, prefer a PNG with a transparent background: anything white in your file will be printed in white.
PDF is accepted in “print-ready file” mode for DTF sheets, stickers and posters, for those who design in layout software. It must already be at the right dimensions, bleed included: the site rejects a file that does not match the size ordered.
Resolution
Aim for 300 DPI at the final print size for textiles, DTF and stickers. A poster is viewed from further away, so 150 DPI is enough. Below that, the designer accepts the file but shows a warning: the result will be visibly blurry.
In practice, an image 1 000 px wide printed at 30 cm is only 85 DPI. Enlarging a file in software adds no detail: start again from the original file, as large as possible.
Colours
Work in RGB, we take care of the rest: print files are converted to CMYK with the Coated FOGRA39 profile, the reference for offset and digital printing in Europe.
One useful caveat: the very bright colours of a screen — fluorescent greens, electric blues, saturated oranges — are outside the colours an ink can reproduce. They will be rendered as closely as possible, so slightly duller. This is not a printing defect, it is the physical limit of the process.
Textile print areas
The maximum printable dimensions on each garment. You can of course print smaller, and combine several areas on the same garment.
| Garment | Chest | Chest | Back |
|---|---|---|---|
| T-shirt | 8 × 8 cm | 29,7 × 42 cm (A3) | 29,7 × 42 cm (A3) |
| Crew-neck sweatshirt | 8 × 8 cm | 29,7 × 42 cm (A3) | 29,7 × 42 cm (A3) |
| Hoodie | 8 × 8 cm | 30 × 30 cm, above the pocket | 29,7 × 42 cm (A3), below the hood |
| Zip hoodie | 8 × 8 cm | — | 29,7 × 42 cm (A3), below the hood |
| Trucker cap | — | 12 × 6 cm (front) | — |
Ready to get started?
Choose your product and design directly online. Unsure about a file, a quantity or a lead time? Write to us before ordering, we will look at it with you.